In addition to forklift drivers should be familiar with the forklift (forklift parts) of the performance of the structure, it should also work to master the basics of loading and unloading. As follows:
First, the good road, the truck's rated lifting 2 tons, poor road conditions in the operation, since the weight should be appropriately reduced, and reduce speed.
Second, loading of goods, the goods should then adjust the size of the distance from the fork, the weight of the goods should be evenly divided by two take the fork to avoid partial load or keeping the goods to the side of the slip. Fork into stacks, the fork side of the wall should be in contact with the goods, then the door frame backward, the forks raised about 200 mm from the ground and then driving.
Third, Sharp dome high-speed driving is strictly prohibited, such as lifting or falling cargo, was absolutely prohibited under the lifting frame.
Fourth, more than 7 ° slope of goods on the goods shall be carried on top of the slope. Road transport of goods shall not be planted for the brakes to prevent the cargo slide. In the large volume of cargo handling, cargo blocking the line of sight, forklift (forklift parts) should reverse at low speed.
Fifth, non-stop after the engine idling unattended, but does not allow goods to leave hanging in the air while the driver's driving position.
Sixth, in the middle truck stop, the engine idle back door frame should be backward, when the engine after parking the whereabouts of the carriage, and forward the goods to stand with.
7, in the course of their work, if suspicious noises or abnormal, must immediately stop checks, take timely measures to exclude, in the absence of troubleshooting before the operation can not continue.
Eight, after a day of work, should the fuel tank filler, so do not like to drive the moisture out of the tank, but also at night to prevent brake gas dissolved in oil in water droplets cemented.
Nine, without the company's leadership agreed that no person shall use forklifts. In order to improve the life and preventing forklift accidents, in order to maintain forklift (forklift parts) the best run state and the normal operation of the parts and, in the course of this machine must be strictly regular maintenance.
Class must be examined before moving the following parts:
1, check the amount of fuel oil.
2, check the tubing, pipes, exhaust pipes and various accessories without leakage.
3, inspection of the tank capacity is up to the required capacity.
4, check the tightness of the wheel bolts and the tire pressure is within specification.
5, check the steering and braking system flexibility and reliability to live.
6, check whether the electrical circuit Ground, connectors are loose, horn, turn signals, brake lights and the instrument is working properly.
More preparatory work is completed, work can begin. |
